Can-Am X3 Race Differential Rebuild & Performance Service
Turn Your Can-Am X3 Differential Into a CryoHeat Race Differential
Your Can-Am X3 makes serious power.
Your differential has to survive it.
Every hard launch, dune pull, desert run, race mile, jump, and high-speed section puts tremendous stress into the drivetrain.
If you're building a Can-Am X3 that you expect to perform at a higher level, your differential shouldn't be treated like an ordinary stock component.
Turn your differential into a CryoHeat Race Differential.
This is more than a basic differential rebuild.
Your differential receives CryoHeat's proprietary metal treatment and Micropolishing processes, designed to improve the strength, service life, thermal characteristics, and surface finish of critical metal components.
Stronger metal. Less friction. Better heat management. Serious performance potential.
What's a CryoHeat Race Differential?
A CryoHeat Race Differential takes the differential components and subjects them to CryoHeat's advanced metal treatment process and Micropolishing.
The goal is to improve the components that are already inside your drivetrain rather than simply replacing them and putting them back into service.
CryoHeat reports that treated UTV differential components can achieve:
-
28–30% stronger steel
-
18–21% stronger aluminum
-
250% or greater service-life improvement
-
20–30°F cooler operating temperatures
-
Reduced friction
-
Acceleration and top-end speed gains
Results can vary depending on the specific material, component, application, and operating conditions.
This is what happens when you stop treating your differential like a stock component and start treating it like a performance component.
CryoHeat Treatment: Strengthen the Metal
The CryoHeat process is designed to address residual stress within treated metal components.
The result is designed to improve the performance characteristics of the components inside your differential.
CryoHeat reports:
28–30% Stronger Steel
Depending on the type of steel, CryoHeat reports 28–30% increased strength in treated steel components.
18–21% Stronger Aluminum
CryoHeat reports 18–21% increased strength in treated aluminum components.
250%+ Service-Life Improvement
CryoHeat reports 250% or greater service-life improvement, depending on the component and application.
Greater Dimensional Stability
Treated components are designed to maintain dimensional stability more effectively through repeated heat cycles and mechanical loads.
Better Heat Dissipation
CryoHeat-treated components are designed to dissipate heat more effectively, contributing to cooler operating temperatures.
Your differential works hard. Give the metal inside it an advantage.
Micropolishing: Make the Surfaces Work Better
Strength is only part of the equation.
Inside your differential, gears and other components constantly move against one another.
That movement creates friction.
Friction creates heat.
Heat creates additional stress.
And friction can consume power that could otherwise be transferred through the drivetrain.
Micropolishing attacks friction at the surface.
CryoHeat's Micropolishing process is designed to create an extremely smooth surface finish on applicable components, allowing metal surfaces to move with dramatically less resistance.
The intended benefits include:
-
Reduced friction
-
Reduced drag
-
Less heat generated by friction
-
Smoother component movement
-
Improved drivetrain efficiency
-
Acceleration gains
-
Potential top-end speed gains
CryoHeat specifically lists reduced friction and acceleration/top-end speed gains among the benefits of the process.
Your engine makes the power. Micropolishing helps reduce the amount of that power being lost to friction.
Why Build a CryoHeat Race Differential?
A standard differential rebuild gets your differential back into service.
A CryoHeat Race Differential takes the concept much further.
Standard Approach:
Replace or reuse components.
Clean them.
Reassemble the differential.
CryoHeat Race Approach:
Treat the metal.
Improve the surface finish.
Reduce friction.
Improve heat dissipation.
Improve the durability characteristics of critical components.
Build the differential for the demands of a performance machine.
That's the difference.
Built for Serious Can-Am X3 Performance
This service is designed for customers who expect more from their X3.
Whether you're:
-
Building a race car
-
Racing Baja
-
Racing the desert
-
Running dunes
-
Building a high-horsepower X3
-
Running aggressive tires
-
Pushing your machine hard
-
Building a dedicated competition vehicle
-
Or simply want a stronger, better-prepared drivetrain
your differential has to deal with the power you're making.
The more you demand from your X3, the more important the components inside your drivetrain become.
Weekend Warrior or Podium Chaser
You don't have to be a professional racer to build a race-level differential.
A weekend warrior can put just as much abuse into a drivetrain over time as a race machine.
Hard launches.
Dune pulls.
High-speed desert runs.
Aggressive trail riding.
Big tires.
More horsepower.
All of it adds load to the drivetrain.
CryoHeat gives you the opportunity to treat the differential components before putting them back into service.
Build it once. Build it with performance in mind.
This Is More Than Micropolishing
Our standard Can-Am Differential CryoHeat + Micropolishing Service is designed specifically to treat your differential components.
The CryoHeat Race Differential takes the concept and packages it as a complete performance-oriented differential service.
Instead of simply purchasing the metal treatment, you're choosing to have your differential transformed into a CryoHeat Race Differential.
This is the choice for customers who want the complete performance treatment rather than simply adding CryoHeat to a component.
CryoHeat Race Differential vs. Standard Differential Service
Standard Differential Service
Designed to tear down, clean, inspect, and rebuild your differential.
CryoHeat + Micropolishing
Designed to treat applicable differential components and improve their surface finish.
CryoHeat Race Differential
Designed for the customer who wants the full performance treatment.
CryoHeat processing.
Micropolishing.
Performance-focused preparation.
A differential built with the demands of a high-performance Can-Am X3 in mind.
What Happens If Your Differential Needs Additional Parts?
Every differential is different.
Once your differential is opened and inspected, we may identify components that are damaged, excessively worn, or require replacement.
Replacement parts are not automatically included in the $850 service price.
Additional components may include:
-
Gears
-
Bearings
-
Seals
-
Shafts
-
Hardware
-
Other damaged or worn components
If additional parts are required, CryoHeat will communicate with you before moving forward with those additional charges.
We won't simply add unexpected replacement parts to your invoice without communicating with you.
The CryoHeat Advantage
CryoHeat's process is designed around one simple idea:
Make the components you're relying on better prepared for the job they're being asked to do.
Your Can-Am X3 is capable of incredible performance.
Don't let the differential be an afterthought.
Give it:
CryoHeat treatment.
Micropolishing.
Reduced friction.
Improved heat management.
Improved durability characteristics.
Performance-focused preparation.
Turn Your Differential Into a CryoHeat Race Differential.
Mandatory Work Order Form Required
Do Not Send Your Differential Without a Completed Work Order Form
A completed CryoHeat Work Order Form is required with every differential sent to CryoHeat for service.
The Work Order Form gives our technicians important information about your Can-Am X3, your differential, how you use your machine, and what you're trying to accomplish.
Please complete the form as thoroughly as possible.
Include:
-
Your contact information
-
Can-Am X3 information
-
Engine modifications
-
Horsepower information
-
Tire size
-
Racing or recreational use
-
Terrain and riding conditions
-
Known differential issues
-
Requested services
-
Performance goals
-
Any other information that may help our technicians understand your build
Step 1: Download the Mandatory Work Order Form
[ADD DOWNLOAD LINK OR BUTTON HERE: Download CryoHeat Work Order Form]
Step 2: Complete the Form
Fill out the form completely and provide as much information as possible about your X3 and how you use it.
Step 3: Include It With Your Differential
Place the completed Work Order Form securely inside the shipment with your differential.
Do not send your differential without the required Work Order Form.
Your Can-Am X3 Wasn't Built to Be Ordinary.
Neither Should Your Differential.
Your X3 makes the power.
Your drivetrain transfers it.
Your differential takes the abuse.
Give that differential the performance treatment it deserves.
Stronger metal.
Smoother surfaces.
Less friction.
Better heat management.
Longer service-life potential.
More performance potential.
Whether you're chasing podiums or simply building the X3 you've always wanted, CryoHeat can help you take your differential to the next level.
